STC 1000 Aquarium Incubation Seafood Machine Electronics Number Microcomputer Temperature Controller Switch 12V

Shell material gray ABS flame retardant plastic shell. Refrigeration control output delay protection. Switch the mode between cooling and heating. Resolution 0 1 accuracy 1 degrees Celsius. Measuring and controlling temperature range 50 110 degrees Celsius. After turning off the power all parameter settings can be saved. Control the temperature by setting the temperature setting value and the difference value. Alarm when the temperature exceeds the temperature limit or the sensor is wrong. Sensor h type imported NTC sensor cable length 1 meter. Please connect the power supply according to the parameters and wiring diagram and connect the cooling or heating equipment to the output terminal. Relay output contact capacity heating 10A 240VAC cooling 10A 240VCA. The OUT indicator on the panel flashing indicates the delay of the cooling or heating start and the constant light indicates the output. Long press set 5 seconds to enter the internal parameter setting press up and down to switch P0 P8 press Rst to confirm and return. Enter the internal settings to select heating enter P0 to select H or cooling enter P0 to select C mode according to needs. It can be used in household freezers water tanks refrigerators industrial chillers steamers industrial equipment and other temperature control applications. Digital tube display LLL for sensor open circuit display HHH for exceeding the measuring range and the thermostat will be forced to power off display high temperature alarm. P0 cooling and heating mode P1 hysteresis setting P2 setting range setting temperature does not exceed this value P3 setting range setting temperature not lower than this value P4 temperature correction P5 delay Start up time unit minutes P6 high temperature alarm P7 data lock function turn on the data lock P8 restores factory settings. Product size 75×34 5x85mm19 Net weight 120g